|
 |
|
We have been extremely satisfied with each of the Wood Mizer mills we have been fortunate enough to own.. We also deeply appreciate the prompt and courtious service that we continue to receive from everyone at Wood-Mizer
Tammy P
,
Tennessee
|
|
|
| |
 |
 |
| |
- Overview
- Features
- Options
- Specifications
- Photos
- Video
|
| |
|
 |
 |
[Click Here]
|
 When the demands for sawing require high production, productivity
and heavy log handling, the new LT50 conquers the challenge.
Featuring full hydraulic log handling controls and plenty of power,
this industrious sawmill is the newest addition in the Wood-Mizer
hydraulic mill line up.
The LT50 is powered by a diesel engine and can cut up to 650 board
feet per hour. Combined with a heavy-duty monorail bed, the LT50
includes hydraulic loading arms, a pair of hydraulic roller toeboards, a
hydraulic log clamp, and a hydraulic vertical side supports and a
bi-directional chain turner. This chain turner works twice as fast
as the standard steel claw turners and moves in both directions for
added convenience.
Bringing even more controls to your fingertips, the Optional
Command Control operator station gives
professional sawyers easy access to all hydraulic controls and cutting
functions such as board thickness and head movement speed. Accuset 2 and AutoClutch are included in the optional Command
Control system for a package that has it all.
So, if you are focused on converting logs to lumber, the LT50 stands
ready to saw. |
| |
| |
Power Options
25 HP 3 phase electric
38 HP gas
47 HP Yanmar diesel |
| |
|
| • |
Monorail System:Assures fast setup, easy leveling, and accurate cuts. |
| • |
Power Movement :High-output electric motors move the head up/down and drive the carriage at any speed up to 170 feet per minute and return the carriage at 200 feet per minute. |
| • |
Hydraulic vertical side supports:15" high. Massive 2" diameter hardened chrome shaft for superior durability. |
| • |
Hydraulic Roller Toeboards:Extra-wide roller toeboards compensate for log taper and allow easy log positioning. |
| • |
Stainless Steel bed Sleeves :Protect the asw bed from wear and also prevent staining of hardwoods. |
| • |
Mill Chassis :Monorail design is much more durable then most twin-rail designs. |
| • |
6 Adjustable Outriggers :For simple rough leveling.(Optional fine-adjust outriggers available. |
| • |
Hydraulic Loading Arms :Logs can be loaded in seconds with the throw of a lever. Each arm features a self-leveling, heavy-duty cylinder. |
| • |
Log Gripper Tip Design |
| • |
Hydraulic Log Clamp :Special two-plane clamping system simplifies sawingof stressed logs. Cuts as close as 1" from the bed are possible . |
| • |
Hydraulic Bi-Directional Chain Turner :Turning a log or cant for the next cut is easy... just move a lever on the control box. Chain turner works twice as fast as standard steel claw turner and moves in either direction! |
| • |
Board Table :Built-in Board Return Table assists in material handling. |
| • |
Standard Centralized Cutting Controls :Located on central console. Includes head movement and blade guide arm in-out. (Optional: Accuset 2 AutoClutch, Lubemizer, Debarker, LaserSight, and Command Control. |
| • |
On-Board Debarker (Optional) :Keeps mud and dirt away from your blades . |
| • |
Board Return Arm :Expedites off-bearing with the help of heavy-duty board-grabbing arm. |
| • |
51 HP CAT Diesel Engine :6 years on-site warranty service. |
| • |
Removable Fuel Tank and Blade Water Bottle :Can be lowered for easy access to mill. |
| • |
Large Throat Capacity :Allows for cuts up to 28" wide. |
| • |
Trailer Package:Includes adjustable outriggers, axle, rims, tires, fenders, brakes, wiring harness, running/turning/stop lights, trailer hitch with ball coupler assembly, and safety chains. |
| LOG HANDLING |
 Hydraulic Roller Toeboards
Extra-wide roller toeboards compensate for log taper and allow easy log positioning. |
 Hydraulic Loading Arms
Logs can be loaded in seconds with the throw of a lever. Each arm features a self-leveling, heavy-duty cylinder. |
| |
|
 Hydraulic Log Clamp
Special two-plane clamping system simplifies sawing of stressed logs. Cuts as close as 1" from the bed are possible. |
 Hydraulic Chain Turner
Turning a log or cant for the next cut is easy… just move a lever on the control box. Chain turner works twice as fast as standard steel claw turner — and moves in either direction! |
|
| Power Options |
|
| 25 HP 3 phase electric |
|
| 38 HP gas |
|
| 47 HP Yanmar diesel |
|
|
Dimensions (with trailer package) |
Length |
26'-2" (8m) |
Width |
6'-6" (2m) |
Height (max head position) |
11' (3.3m) |
Weight (with heaviest power options) |
4370 lbs. (1982kg) |
|
Maximum Cutting Capacities** |
Log Lengths |
21' (6.4m) and up to 45' (13m) w/ BX |
Log Diameter |
36" (91cm) |
| Production Rates*** |
up to 650 bd. ft./hr. |
| Power Selections |
25 HP (18.5kW) 3 phase electric |
| |
51 HP (38kW) Diesel |
|
Blades |
.055" (1.4mm) or .045" (1.14mm) thick x 1.5" (38mm) or 1.25" (32mm) wide |
Feed System |
High-Output12V Electric |
Up/Down |
High-Output12V Electric |
Trailer Package |
Standard |
Bed Extensions **** |
6', 12', 24' (Optional) |
Stainless Steel Bed Sleeves |
Yes |
Log Turner |
Bi-Directional Chain (Hydraulic) |
Toeboards |
Roller (Hydraulic) |
Board Return |
Yes |
| Command Control † |
Optional |
Accuset 2 |
Optional |
| Manual Winch |
N/A |
Debarker |
Optional |
| Log Loader |
Yes (Hydraulic) |
| LubeMizer |
Optional |
| |
|
* Dimensions and weight for the LT15 are not calculated using the optional trailer package.
**Maximum log capacity for a basic LT10 is 3,500lbs. LT15 is 4,000lbs, and LT28 and larger mills are 4,400lbs. (1,996kg)
***Due to many variables, actual production figures may vary. Call for details.
****Loading of logs heavier then 4,400 lbs. (1,996kg) [BX equppied mills] requires auxiliary log handling equipment.
† Command Control & remote operator station accommodate one 6' bed extension only. |
| Click images for larger view. |
 |
|
|
| The New LT50 Hydraulic Sawmill |
|
|
|
|
|